Product Performance - Zonair3D PURE AIRBOX HOME "S" Manual De Usuario

Product performance

PLUGGED IN AND TURNED ON OF THE PURE AIRBOX HOME "S"
The equipment you have purchased is "plug & play", that is, it does not need any
previous configuration.
1. Before turning it on, check that you have all the relevant items: cable and Pure
Airbox Home "S" purifier
2. Locate a power supply for connection to the Pure Airbox Home "S" and plug the
equipment to the power supply using the power cord of the Pure Airbox Home "S".
3. To switch the equipment on, double click on the power button (ON / OFF) and
the screen and its perimeter light will illuminate.
3. Select speed mode and increase speed to maximum (10). (See point 1, page 21).
4. After having checked its proper operation, it is recommended to set the purifier
at its maximum speed during the first 10 minutes to execute a deep cleaning of
the room.
5. Then, it is recommended to leave it at medium speed, below 5, to maintain
optimal recirculation and comfort speed.
6. If you are going to set the automatic shutdown of the equipment, use the timer
button (see point 2, page 21), selecting the desired operating time.
The screen turns off automatically after 1 minute of inactivity.
But, if you want to turn off the lights on the screen in that very moment, click
once on the ON / OFF button.
The proximity sensor detects the movement of your hand as it passes over and
turns the screen back on.
SWITCHING OFF AND DISCONNECTION OF THE PURE AIRBOX HOME "S"
To turn off the equipment, press and hold on the ON / OFF button for 3 seconds.
If you are going to stop using the purifier for a long period of time, it is recommended
to disconnect from the power supply.
22 Pure Airbox Home "S"