Grandstream GXP2010 Manual Del Usuario página 4

Tips For Using the Keypad:
Transfer
Conference
Mute
Do-Not-Disturb
Headset
Intercom
Phonebook
GXP2020 Keypad
Line Keys
Phonebook
Conference
Transfer
Do-Not-Disturb
Headset
Standard Keypad
GXP2010 Keypad
1. To access the MENU, press the round MENU button.
2. Navigate the menu by using the UP/DOWN and LEFT/RIGHT buttons.
3. Press the round MENU button to confirm a menu selection.
4. Delete an entry by pressing the MUTE button.
5. The phone automatically exits MENU mode with an incoming call, the phone is
off-hook or the MENU mode is left idle for 20 seconds.
PHONE CONFIGURATION:
Configure the GXP2020/2010 using a Web Browser:
1. Ensure your phone is powered up and connected to the Internet.
2. Press MENU button to go into menu of the phone.
5
Message Waiting Indicator
Line Keys
Message
Navigation Keys
Menu/OK Key
Soft Keys
Standard Keypad
Multipurpose Keys
Send
Speaker
Hold
Message Waiting Indicator
Soft Keys
Message
Navigation Keys
Menu/OK Keys
Mute
Intercom
Multipurpose Keys
Send
Speaker
Hold
3. Press down arrow button to Status and press MENU button to see IP address.
4. Type the phone's IP address in your PC browser. (See figure below)
5. The default administrator password is "admin"; the default end-user password
is "123".
Configure the GXP2020/2010 using the Keypad:
1. Make sure the phone is idle
2. Press the "MENU" button to access the keypad MENU to configure the phone.
3. Select MENU-> Config, to configure settings for SIP Proxy, Outbound Proxy,
SIP User ID, SIP Auth ID, SIP Password
4. Follow MENU options to configure the basic features of the phone – for ex-
ample: the IP address if using a static IP. For details, please check GXP Series
User Manual.
5. Please contact your ITSP for additional settings that may be necessary to
configure the phone.
GXP2010/2020 EXT EXPANSION MODULE
The GXP2010/2020EXT module is an ideal solution for the busy enterprise envi-
ronment looking to add the ability to receive and dispatch calls efficiently.
Each expansion module has 56 programmable buttons. The GXP phone sup-
ports up to two EXT Modules, adding 112 fully programmable phone extensions
to the phone.
Note: The extension module is an additional accessory for the GXP2020/2010
and is not included in the box
6