Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
In Manual mode, press
to set the power in following order:
2000W(
)-1000W(
)-Fan(
). Press again, the power
changing will repeat the cycle.
Window mode(ONLY work during manual program):
Press
to turn on open-window detection:
During open-window detection mode,once the ambient
temperature drops 5-10℃ within 10 minutes, then the product will
stop working within 30 minutes and enter into stand by mode.
Press the
button again to turn off open-window detection.
WEEKLY PROGRAM SETTING (PROGRAM MODE)
Weekly program explain:
1. It can set day by day from Monday to Sunday. And for each
day, it can set 2 working periods(P1/ P2)
2. The product works at full power(2000W) during weekly
program.
WEEKLY PROGRAM SETTING:
In STANDY MODE: Press
for 3 seconds, it enters into
WEEKLY PROGRAM setting,the icon
flashes on the screen
until complete the whole setting. And the day icon (1 2 3 4 5 6 7)
flashes, use + and - to select the day，P1 shows in screen（The
wake up time for the initial setting, the time shows "OFF". Press
,the time become
and can start to set）. Press OK, it
enters into next step - wake up time setting: the hour flash ,use +
and - to set(23-hours). Then press OK, it enters into next step -
flashes. Use + and – to
minutes setting: the minute icon
set minute(0-58 minutes). Then press OK, it enters into next step
- temperature setting: setting temperature flashes 20 (default
57
Publicidad
Tabla de contenido
