temperature setting is 20° C), use + and - to set(selected
temperature range 5° C - 40° C). Press OK, it enters into next step
- OFF time setting:
the hour flash
OK, it enters into next step - minutes setting: to minute setting,
the minute icon
minutes). Press OK to confirm and it automatically enter to next
working period. In this cycle, you can set 7 days on/off timer.
The
will be displayed on the working status. If you want to turn
off the weekly program, press
will disappear.
Remark:
1.During the process of WEEKLY program setting, if you want to
quick finish the setting, press
exit.
2.After complete all settings(14 working periods=7days x
2periods/day), if you want to remove 1 period: go to this period,
then press
3.For the current day: Before P1 starts, P1 working period will
on the screen; If P1 pass, P2 working period will on the screen; If
P2 pass, the timer symbol will show on the screen.
Cleaning
To ensure your appliance gives you lasting service, you should
clean it regularly.
Warning! To avoid the danger of anelectric shock or burning:
-
always be sure that the appliance is switched OFF before
cleaning or attempting to store the item;
-
allow the appliance to cool down;
-
never immerse the appliance in water;
, use + and - to set(23-hours). Then press
flashes. Use + and – to set minute(0-59
, the time will change to "OFF".
to turn off,and the
for 3 seconds to confirm and
58
screen