Technical Information - Blaupunkt GX 1000 Manual Del Usuario

TROUBLESHOOTING
Problem
The motor will not start.
The motor speed drops
Not all the grass goes into the
catcher

TECHNICAL INFORMATION

Voltage
Frequency
Rated output
Speed (no load)
Cutting height
Max. cutting diameter
Net weight
Protection rating
Sound pressure level, LpA
Measured sound power level, LwA
Guaranteed sound power level, LwA
Vibration level
Type of catcher
Always wear ear protection!
The declared vibration value, which has been measured by a standardised test method, can be used to compare different tools with
each other and for a preliminary assessment of exposure.
WARNING! The actual vibration level when using power tools may differ from the specified maximum value, depending on how the
tool is used. It is therefore necessary to determine which safety precautions are required to protect the user, based on an estimate
of exposure in actual operating conditions (taking into account all stages of the work cycle, e.g. the time when the tool is switched
off and when it is idling, in addition to the start-up time).
1. Check the power cord, RCD and fuse.
2. Start the machine in short grass or on an area that has already been cut.
3. Clean the outfeed opening and cover. The blade must rotate freely.
4. Set a suitable cutting height.
1. Set a suitable cutting height.
2. Clean the outfeed opening and cover.
3. Have the blade sharpened at an authorised service centre.
1. Set a suitable cutting height.
2. Allow the lawn to dry.
3. Have the blade sharpened at an authorised service centre.
4. Clean the grille on the grass catcher.
5. Clean the outfeed opening and cover.
230–240 VAC
50 Hz
1000 W
3450 rpm
20, 40 or 60 mm
320 mm
8.8/8 kg
IPX4
82.5 dB(A), K = 3 dB(A))
91.1 dB(A)
94 dB(A)
3.79 m/s2, K = 1.5 m/s2
Plastic catcher box
Action