Dynex DX-NBKIT20 Guía Del Us Usuario página 11

DX-NBKIT20-combo.fm Page 11 Wednesday, May 18, 2005 3:58 PM
Using the notebook surge protector
Installing the surge protector
To install the surge protector:
1 Turn off and unplug the notebook to be protected.
2 Unplug the power cord from the notebook power adapter.
3 Examine the power cord plug that connects to the power adapter.
If the notebook power adapter uses a three-prong connector, go to step 4.
OR, if the notebook power adapter uses a two-prong connector, plug the
provided two to three-prong adapters into both ends of the surge protector.
4 Plug the surge protector into the notebook power adapter, then plug the
notebook power cord into the surge protector.
Two-prong
Three-prong
connector
connector
11