Dynex DX-NBKIT20 Guía Del Us Usuario página 12

Kit para notebook
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

DX-NBKIT20-combo.fm Page 12 Wednesday, May 18, 2005 3:58 PM
12
5 If you use a dial-up modem, disconnect the telephone cable from the wall
and plug it into the notebook surge protector jack labeled OUT.
6 Plug one end of the supplied telephone cable into the wall telephone jack
and plug the other end into the notebook surge protector jack labeled IN.
Understanding the indicators
The Power indicator is green when power is turned on.
The Surge indicator is red when surge protection is turned on.
Troubleshooting
Problem
No dial tone
Network is
disconnected
Green power indicator
and red surge
indicator are not on.
Green power indicator
is on, but red surge
indicator is not on.
Using the notebook surge protector
In
Out
Solution
• Make sure that the telephone cables are fully inserted into
the correct jacks.
• Make sure that the network cables are fully inserted into the
correct jacks.
• Make sure that the outlet has power and the power cord is
plugged in.
• Contact technical support.
• Contact technical support.

Publicidad

Tabla de contenido
loading

Tabla de contenido