The Setup Wizard (continued)
Enter networking information
Since this is the first time you configure the system, the following networking settings
will be adopted by default:
IP: 192.168.0.101
Subnet mask: 255.255.255.0
Default gateway:192.168.0.1
DNS server: empty
You can modify the settings to fit your need.
Click Next
If a DHCP server is available in the same network environment and you prefer to
obtain the networking settings for the system from the DHCP server, change the "Get
IP From" drop-down menu from Manual to DHCP and then click Next.
Setup time settings
1. Select your time zone from the "Time zone" drop-down menu.
2. Choose to enable network time synchronization protocol (NTP) or manually set
the system time.
3. Click "Next."
7