Black+Decker GH1000 Manual De Instrucciones página 24

24 • ENGLISH
Extension Cords shall be not lighter than:
f If rubber insulated, ordinary tough rubber sheathed
flexible cord (code designation 60245 IEC 53)
f If polyvinyl chloride insulated, ordinary polyvinyl
chloride sheathed flexible cord (code designation
60227 IEC 53).
Always use an approved extension lead suitable for the
power input of this tool. Before use, inspect the extension
lead for signs of damage, wear and ageing. Replace
the extension lead if damaged or defective. When
using an extension lead on a reel, always unwind the
lead completely. Use of an extension lead not suitable
for the power input of the tool or which is damaged or
defective may result in a risk of fire and electric shock. It
is recommended that the extension lead is a maximum of
25m in length. Do Not use multiple extension leads.
f Before use check the supply and extension cord
for signs of damage or aging. If the cord becomes
damaged during use, disconnect the cord from
the supply immediately.
Note: Do not touch the cord before disconnecting
the supply. Do not use the line trimmer if the cord
is damaged or worn.
f Keep extension cord away from cutting line.
f Never allow children or people unfamiliar with these
instructions to use the line trimmer.
f Avoid using the line trimmer, while people, especially
children or pets, are nearby.
f Use the line trimmer only in daylight or good artificial
light.
f Never operate the line trimmer with damaged guards
or without guards in place.
f Switch on the line trimmer only when the hands and
feet are away from the cutting head.
f Never fit metal cutting blades.
f Use only the manufacturer's recommended
replacement parts and accessories.
f Always disconnect the line trimmer from the mains
when leaving the line trimmer unattended.
f Disconnect the line trimmer from the mains before
carrying out maintenance or cleaning work.
f Inspect and maintain the line trimmer regularly.
Have the line trimmer repaired only by an authorized
repairer.
f Take care against injury from the blade(s) fitted for
trimming the cutting line length. After extending new
cutting line, always return the line trimmer to its
normal operating position before switching on.
f When not in use, store the line trimmer out of the
reach of children.
f Face the cutting head away from yourself, other
people and animals while the power is connected to
the line trimmer (especially during operation).
f Disconnect the power when changing spools or
clearing grass from under the guard.
f Disconnect the power from the line trimmer before
making any adjustments.
f Use both handles.
f Keep ventilation openings clear of debris. Keep
handles dry, clean and free of oil and grease.
f Never reach underneath the line trimmer (the cutting
line area) until it has completely stopped and the
power has been disconnected.
ADDITIONAL SAFETY WARNING FOR
TRIMMERS/EDGERS
f Always wear eye protection: Wear safety
spectacles or goggles at all times when this tool is
plugged in.
f Guard: Do not use this tool without guard attached.
f Dress properly: Do not wear loose clothing or
jewelry. They can be caught in moving parts.
Rubber gloves and substantial rubber soled footwear
are recommended when working outdoors. Don´t
operate the tool when barefoot or wearing open
sandals. Wear long pants to protect your legs. Wear
protective hair covering to contain long hair.
f Nylon line: Keep face, hands and feet clear of
rotating nylon line at all times.
f The rotating line performs a cutting function:
use care when trimming around screens and desirable
plantings.
f Keep all by -standers away: At a safe distance from
work area, especially children.
f Important warning: When being used as an Edger,
stones, pieces of metal and other objects can be
thrown out at high speed by the line. The tool and
guard are designed to reduce the danger. However,
the following special precautions should be taken:
f Make sure that other persons and pets are at least
100 feet (30m) away.
f To reduce the risk of rebound (ricochet) injury, work
going awayfrom any nearby solid object such as wall,
steps, large stone, tree, etc. Use great care when
working close to solid objects and where necessary,
do edging or trimming by hand.
f Avoid accidentally starting: Don´t carry plugged-in
tool with finger on trigger.
f Do not force the tool: at a rate faster than the rate at
which it is able to cut effectively.
f Use the right tool: Do not use this tool for any job
except that for which it is intended.
f Don´t overreach: Keep proper footing and balance
at all times.
f Don´t abuse cord: Don´t yank cord from power
supply. Keep cord from heat, oil, and sharp edges.
f Damage to unit: If you strike or become entangled
with a foreign object, stop tool immediately, unplug,
check for damage and have any damage repaired