Display Icons - Hawke Hunter Manual Del Usuario

DISPLAY ICONS

1. Aim point with horizontal and vertical guides.
2. Measuring units (M = meters, Y = yards)
3. Distance readout
4. Targeting modes
5. Targeting quality indicator
6. Laser emission signal
7. Low battery indicator
OPERATION
1. Quick press the ON button.
2. Adjust the diopter setting to get a sharp on-screen display for your eyesight.
3. When turned on, the range finder will start in the same mode it was in when last used.
4. To cycle through the modes simply press the MODE button until you come to the setting you
desire.
5. Quick press the ON button to range find the target you are aiming at.
6. The signal strength is displayed beneath the aim point. A minimum of 6 bars is needed to operate,
10 bars is the maximum strength.
7. The laser range finder will automatically turn off when not used for 15 seconds.
5
3
4
2
1
5
6 7