long grass or woodland. When Hunt mode is triggered the icon will have a circle around it as below:
Note: If no distance reading is possible the on-screen display will show 3 dashes followed by "End".
The LRF has not been able to collect a strong reading and must be retried.
UNITS OF MEASUREMENT
The laser range finder can measure in meters or yards. To change between the two settings hold
the MODE button for 3 seconds. M = meters, Y = yards
ADDITIONAL INFORMATION
• The quality of the measurements strongly depends on the structure of the object, the weather
and visibility conditions. The more straight the laser beam strikes an object, the greater distances
can be measured.
• The LRF should only be repaired by a qualified professional. Do not attempt to disassemble or
repair the LRF as this will invalidate the warranty.
7