Zyris ISOLITE Instrucciones De Uso página 13

Warnings
YDdiL
YWARNING: Shock hazard if incorrect
power supply is used. Only use the power
adapter supplied with your Isolite. Use of
other power sources may damage
electronics and voids your product
warranty. The electrical system
requirement is 5.0 VDC, 1.0 amp.
YWARNING: Do not place a metal HVE
valve onto the Power Hose. This may
damage electrical components and may
present a shock hazard.
D WARNING: Mouthpieces are single
use only. Reuse can result in the
transmission of infectious pathogens.
Mouthpieces must be discarded after use.
Mouthpieces cannot be safely resterilized
after use.
LWARNING: Do not use if the individual
Mouthpiece package has been previously
damaged or opened. Mouthpieces are
individually packaged in polyethylene
bags.
YWARNING: Be sure to use
established protocols and patient
monitoring when using the Mouthpiece
in conjunction with sedation
dentistry. Patient management
by a certified anesthesiologist is
strongly recommended.
Precautions
YCAUTION: When performing dental
procedures requiring high levels of blood
evacuation, it is recommended that the
Mouthpiece be intermittently flushed
with water to prevent coagulation in the
Mouthpiece to avoid loss of suction and
light transmission.
YCAUTION: Do not block access to the
Power Adapter. The Power Adapter should
be easily accessible so that it can be
unplugged from the wall outlet if necessary.
YCAUTION: To avoid electrical shock,
the use of an extension cord with the
Power Adapter is not recommended.
YCAUTION: Do not crimp or fold the
Power Hose to shut off suction. Internal
damage to the Power Hose wiring
may occur.
YCAUTION: The LED Smart Stick
contains sensitive electronics and requires
special care and handling. Do not
submerse, autoclave, Chemclave, or place
in ultrasonic cleaner.
YCAUTION: The LED Smart Stick should
only be removed and installed while the
Titanium Control Base is attached to the
power hose. Failure to do so may result in
damage to the gold connector pins.
EN
13