Device Description; Power Adapter - Zyris ISOLITE Instrucciones De Uso

Device Description

Isolite Illuminated Dental Isolation System
®
4
h EIL0201 (USA)
This system is intended for use with the Mouthpieces developed by
Zyris, Inc. These Mouthpieces are available in a wide range of sizes for
effective isolation.
Each Isolite Illuminated Dental Isolation System is comprised of four main
components: 1) Titanium Control Base, 2) Vacuum Light Pipe, 3) Power
Hose, 4) LED Smart Stick.
Titanium Control Base
h PIL0201
The Titanium Control Base
includes two Vacuum Levers
(P/N: PIL0205) to adjust suction
in the upper and lower areas of
the Mouthpiece.
LED Smart Stick
h PIL0202
The LED Smart Stick controls the
LED light source. The one-button
light control adjusts: on/off,
5 levels of brightness, and a
cure-safe mode.
Vacuum Light Pipe
h PIL0204
The Vacuum Light Pipe transmits
ultra-bright light while channeling
suction. The Mouthpiece attaches
onto the Vacuum Light Pipe.
h EIL0204 (EU)
Power Hose
h PIL0203 (USA) (1.82 m / 72 in)
h PIL0208 (USA) (0.91 m / 36 in)
h PIL0209 (USA) (1.22 m / 48 in)
h PIL0210 (USA) (1.52 m / 60 in)
h PIL0211 (EU/AUS) (1.32 m / 52 in)
The Power Hose delivers both power
and vacuum suction from the
vacuum canister to the Control Head.
The Power Hose connects to the
vacuum canister. At the end of the
Power Hose, an indicator light will
alert the user if an incorrect power
adapter has been plugged into the
Power Hose.

Power Adapter

h PIL0207
The Power Adapter delivers electrical
power to the Power Hose and the
LED Smart Stick. It connects to the
Power Hose at the Power Jack and
plugs into a standard power outlet
(110v or 220v).
h EIL0205 (AUS)