O P E R At I O N - Lantheus Medical Imaging VIALMIX Guia Del Usuario

O P E R AT I O N

■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■
3.1
5 1 5 3 7 0 - 0 8 1 0
P O W E R I N G O N V I A L M I X
With V i a l m i x p ro p e r ly connected to the main powe r, the unit can be
®
p owe red on by moving the switch on the back of the unit to the "1"
p o s i t i o n .
During power-on, the LED will display "88" briefly.This will change to "45,"
representing the cycle time in seconds.The display will remain at "45" until
an activation cycle is initiated.
P O W E R I N G O F F V I A L M I X
Vialmix should be powered off at the end of the day.This is done by
®
moving the switch on the back of the unit to the "0" position.
®
®