Assembly Instructions - MTD Yard Machines MTD25P Manuel Del Dueño/Operador

For Parts Call 606-678-9623 or 606-561-4983 For Parts Call 606-678-9623 or 606-561-4983
If you receive your unit assembled, check each step to
insure your unit is properly assembled. Follow all safety
information in the manual and on the unit.
ASSEMBLY
1. Assemble three parts into unit. (Fig. 1)
2. Take out assembly screw bolts, washers, nuts from
parts pack and lock into the unit holes (the correspond
location are as Fig. 2)
3. First of all, put the nut in the hole, then support the nut
with your finger and put plug the bolt and washer in
from other side and tighter. (Fig. 3)
Arrows

ASSEMBLY INSTRUCTIONS

Fig. 1
Fig. 2
Fig. 3
www.mymowerparts.com www.mymowerparts.com
DEBRIS SHIELD INSTALLATION
Assemble shield as shown (Fig. 4). Keep hands and fingers
away from the sharp blade. Twist shield in direction of arrow
to assemble.
7
Fig. 4