Ventilation; Installation Instructions - Foster 73 68 020 Instrucciones De Instalación

Ventilation

Important: the cooling system needs constant airflow. Please maintain a space of at least 50mm
under the induction plates to guarantee a constant airflow: See the below drawing as an
example
.

Installation instructions

Installation:
The installation must be carried out by a specialized technician.
The installer must respect the local norms and standards in use.
 The worktop or support on which the hob is installed, along with all the materials installed
must be able to resist to temperatures of up to 100 °C.
 The nearby walls and edges must also be able to resist to high temperatures.
 The hobs are classified as "Y" class for heat protection. Ideally the hob should be
installed with plenty of side space on either side to allow air circulation. In the case of a
rear and side wall make sure the opposite sides are clear from any wall, unit or
divider, mobile or immobile, with a height superior to the installation surface of the
cooker hob.
 Ensure that there is a distance of 50 mm between the hob and the wall or edges.
 Some materials which are often used to make worktops tend to expand when in contact
with water. Attention must be used for the installation of the gasket supplied with the
apparatus. The main function of these gasket is to prevent that spilled liquids flow to the
below cabinets. This gaskets guarantees the maximum protection in combination with a
smooth work tops.
 The safety gap between the hob and the cooker hood placed above the apparatus must
respect the indications of the hood manufacturer. In case of absence of instructions
please maintain a minimum distance of 650 mm.
 The connection cords should be not be tense or subject to solicitation or friction, for
example near a drawer.
12