Tools And Materials; Before You Begin - Kohler K-10215 Guía De Propietario

Thank You For Choosing Kohler Company
We appreciate your commitment to Kohler quality. Please take a few
minutes to review this manual before you start installation. If you
encounter any installation or performance problems, please don't
hesitate to contact us. Our phone numbers and website are listed on
the back cover. Thanks again for choosing Kohler Company.

Tools and Materials

Adjustable
Wrench

Before You Begin

IMPORTANT! Plumbers putty is not needed to install this faucet.
The base of the faucet (for one-hole lavatories) and the seal plate
(for three-hole lavatories) acts as a water barrier.
Observe all local plumbing and building codes.
Shut off the main water supply.
Inspect the supply tubing for damage. Replace as necessary.
This faucet is for use on a single-hole lavatory. If the faucet will
be mounted on a three-hole lavatory, use the optional escutcheon
and seal plate (provided).
Clean the lavatory surface to remove any grease, oil, or debris.
For new installations, install the faucet and drain to the lavatory
before installing the lavatory.
Kohler Co. reserves the right to make revisions in the design of
faucets without notice, as specified in the Price Book.
1056602-2-B
Hex Thread
Wrench Sealant
2
Plumbers
Putty
Kohler Co.