Veridian TENS Manual Del Usuario página 19

INSTRUCTIONS FOR USE
As you press and release the button, the green light will
illuminate once for each intensity level adjustment.
7. To change the mode, while the unit is on/operating, press and
hold the '+' for 3 seconds; the mode will switch the next in the
sequence of pulse types — scraping, massage, acupuncture,
tapping or combination (all 4 types in sequence/default mode).
As you press and hold the button, the green light will illuminate
two times to indicate the change in mode type.
8. The sensation should be strong but comfortable; press the + or –
button at any time during the treatment to change the intensity
as desired.
9. The device will pulse for several seconds, pause and resume
repeatedly until the treatment is finished.
10. The device will automatically shut off after 20 minutes of use.
To discontinue use prior to the end of treatment time, press and
hold the POWER button. The green light will flash three times
and the device will turn off. Do NOT attempt to remove the
device during operation.
Until you are familiar with use of the unit, begin with
the lower intensity levels and gradually progress to
more advanced levels as you feel comfortable.
ENGLISH • 19