Installation; Preparing For Installation - Glacier bay 67070-3004 Guía De Uso Y Mantenimiento

Installation

1

Preparing for installation

CAUTION: Always turn off the water supply before
removing an existing faucet or replacing any part of a
faucet. Open the faucet handle to relieve water pressure
and ensure that the water is completely shut off.
□
Shut off the water supply.
□
Before installation, remove the quick connector
(E) from the free end of the hose by unscrewing
it in a counterclockwise direction.
□
Unscrew the nut (D), and remove the
washers (B & C).
C
D
A
B
E
4
2
Installing the faucet assembly
NOTE: Do not feed the hose (1) back down through the
spout until step 4.
□
Retract the hose (1) up through the faucet body
until the hose tting is ush with the bottom of
the shank (2). Do not pull the hose tting past
the shank. Insert the faucet body through the
hole in the sink.
2
1