Installation (continued)
5
Attaching the quick connector
to the receiving block
□
Push the quick connector (E) rmly upward and
attach it to the receiving block (1). Pull down
moderately to ensure the connection has been
made.
□
After connecting the hose, install the weights (F)
at the point of the hose marking "weights here".
F
6
□
□
1
E
6
Installing the soap dispenser
Insert the body assembly (H) through the
selected hole in the sink. Secure the body
assembly to the sink with the nut (I).
From under the sink, screw the bottle (J) onto
the body assembly (H) shank. Insert the pump
(G) down into the body assembly (H).
G
H
I
J