Descargar Imprimir esta página

Taurus Perfect Manual De Instrucciones página 13

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 1
- Replace the cover of the battery
compartment.
- It is essential that the batteries
should always be the same kind and
the same charge. Never mix alkaline
batteries with normal one (Carbon-
Zinc) and/or rechargeable ones.
Instructions for use
Use:
- Use the height selector (B) to reach
the desired shaving level.
- Turn the appliance on, by using the
on/off switch.
How to shave clothes:
- Place the garment on a smooth
surface.
- The remover's handle moves and
adapts to the contours of the fabric.
This feature also makes it suitable
for removing lint from furniture and
carpets.
- Do not use the appliance on
garments that are being worn in
order to avoid damage on the user or
garment.
- For best results, please follow these
recommendations:
- For fast remove, take the remover
circle and shave in small range
removing to and forth on clothes (Fig.
2)
- For sticking lint, move on the
clothes perpendicularly and parallel
until is removed (Fig. 3)
- On thin texture clothes, pile them
up into two layers and shave them
gently (Fig. 4)
- On clothes with protrudes or
applications, avoid contact with the
applications or protrudes (Fig. 5)
- On clothes with patterns, move
the appliance in the direction of the
pattern for better results (Fig. 6)
Once you have finished using the
appliance:
- Turn the appliance off, using the on/
off switch.
- Remove the fluff container and
empty it accordingly (Fig. 7).
- Remove the battery from the
appliance if you are not intending to
use the appliance during an extended
period.
- Clean the appliance.
Cleaning
- Disassemble the appliance in
accordance with the following steps:
• Take off the remover circle
(Fig. 8).
• Remove the outer foil as arrow
direction (Fig. 9)
• Take out the rotative blades and
clean the blades shaft with the
brush (Fig. 10).
• Reverselly install the blades
and outer foil into the appliance
(Fig. 11)
- Clean the equipment with a damp
cloth with a few drops of washing-up
liquid and then dry.
- Do not use solvents, or products
with an acid or base pH such as
bleach, or abrasive products, for
cleaning the appliance.
- Never submerge the appliance in
water or any other liquid or place it
under running water.
Anomalies and repair
- Take the appliance to an authorised
technical support service if a product
damage or other problems arise. Do
not try to dismantle or repair without
assistance, as this may be dangerous.

Publicidad

loading