Cooper Lighting MT125 Instrucciones página 2

MT125 825-0050.qxp:Layout 1
Congratulations! You have purchased a Cooper Lighting, LLC floodlight
kit. The MT125 is constructed with rugged diecast aluminum and should provide
years of trouble free weatherproof service.
Required for installation (not supplied)
• Screwdriver
• Weatherproof silicone caulking
• (1) 150 Watt (MAX) PAR 38 floodlight bulb (A)
What's included
• Light fixture (B)
• Coverplate gasket (C)
• Lampholder gasket (D)
• Wire nuts (E)
• Mounting screws (F)
What to know
PLEASE READ THESE IMPORTANT SAFETY INSTRUCTIONS.
• For outdoor use only.
• cULus Listed for use in wet location use.
• Fixture must be connected to a 120 volt, 60 Hz power source (any other
connection voids warranty).
• Fixture should be installed by a qualified electrician or by persons with
experience in household wiring. The electrical system, and the method
of electrically connecting this fixture to it, must be in accordance with the
National Electrical Code and local building codes.
• Fixture should be mounted to a grounded junction box marked for
use in wet locations.
• Suitable for wall mount or eave mounting only. Not suitable for ground
mount installation.
• Keep away from flammable objects. Do not position fixture
within one inch of any combustible materials.
• The bulb and fixture get extremely hot during use. Allow fixture
to cool completely before attempting to reposition fixture.
• Always replace bulb with the same wattage or lower wattage than marked.
Installing a bulb of a higher wattage could create a fire.
• Disassembly of your fixture will void the warranty.
Installing your fixture
WARNING: Risk of electric shock.
Call for customer service and/or missing or damaged parts (800-334-6871)
1/25/08 9:22 AM Page 2
B
2
MT125, CMT125 (Bronze)
MT125W, CMT125W (White)
A
C
E
D
F