Metra 99-7881 Instrucciones De Instalación

Descargar este manual

INSTALLATION INSTRUCTIONS FOR PART 99-7881G

KIT FEATURES

• ISO DIN Head unit provision with pocket

• Painted to match factory finish

KIT COMPONENTS

• A) Radio Trim Panel • B) Radio Brackets • C) Pocket • D) (6) Panel Clips

• E) (8) #8 x 3/8" Truss-head Phillips screws • F) (2) #8 x 1/2" Pan-head Phillips screws

WIRING & ANTENNA CONNECTIONS (Sold Separately)

Wiring Harness: • 70-1729 - Honda harness 2008-up

Antenna Adapter: • 40-HD11 - Honda antenna adapter 2009-up

Panel Removal Tool • Phillips Screwdriver • Socket Wrench

APPLICATIONS

Honda Civic 2012-up

99-7881G

TOOLS REQUIRED

METRA. THE WORLD'S BEST KITS.™

1-800-221-0932

metraonline.com

Página 1 Wiring Harness: • 70-1729 - Honda harness 2008-up Antenna Adapter: • 40-HD11 - Honda antenna adapter 2009-up TOOLS REQUIRED Panel Removal Tool • Phillips Screwdriver • Socket Wrench METRA. THE WORLD’S BEST KITS.™ metraonline.com 1-800-221-0932 © COPYRIGHT 2004-2011 METRA ELECTRONICS CORPORATION...
Página 2 Kit Assembly – ISO DIN head unit provisions Caution Metra recommends disconnecting the negative battery terminal before beginning any installation. All accessories, switches, and especially air bag indicator lights must be plugged in before reconnecting the battery or cycling the ignition.
Página 3: Dash Disassembly
99-7881G Dash Disassembly 1. Remove instrument cluster surround panel. (Figure A) 2. Remove (2) Phillips screws securing accessory power socket panel. (Figure B) 3. Remove (2) 8mm/Phillips screws from under radio chassis. (Figure C) 4. Remove radio from dash and disconnect harnesses.
Página 4 3. Slide the head unit into radio brackets and secure with screws supplied with the unit. (Figure C) 4. Locate the factory wiring harness and antenna plug in the dash. Metra (Figure A) recommends using the proper mating adapters from Metra and/or AXXESS.
Página 5 Notes...
Página 6 Notes...
Página 7 Notes...