Publicidad
Idiomas disponibles
Idiomas disponibles
INSTALLATION INSTRUCTIONS FOR PART 99-7881G
Honda Civic 2012
KIT FEATURES
• ISO DIN radio provision with pocket
• Painted to match factory dash
KIT COMPONENTS
• A) Radio trim panel • B) Radio brackets • C) Pocket • D) (6) Panel clips
• E) (8) #8 x 3/8" Truss-head Phillips screws • F) (2) #8 x 1/2" Pan-head Phillips screws
A
B
WIRING & ANTENNA CONNECTIONS (sold separately)
Wiring Harness: • 70-1729 - Honda 2008-up harness • 70-1730 - Honda 2008-up amp I/F harness
Antenna Adapter: • 40-HD11 - Honda antenna adapter 2009-up
TOOLS REQUIRED
• Panel removal tool • Phillips screwdriver • Socket wrench
METRA. The World's best kits.
APPLICATIONS
99-7881G
C
D
®
metraonline.com
Dash Disassembly
– Honda Civic 2012
Kit Assembly
ISO DIN radio provision with pocket
–
E
F
CAUTION: Metra recommends disconnecting the
negative battery terminal before beginning any
installation. All accessories, switches, and especially
air bag indicator lights must be plugged in before
reconnecting the battery or cycling the ignition.
NOTE: Refer to the instructions included with the
aftermarket radio.
© COPYRIGHT 2017 METRA ELECTRONICS CORPORATION
U.S. PATENT # D716,790
Table of Contents
.............................................. 2
................ 3
Publicidad
Tabla de contenido
Manuales relacionados para Metra 99-7881G
Resumen de contenidos para Metra 99-7881G
- Página 1 U.S. PATENT # D716,790 INSTALLATION INSTRUCTIONS FOR PART 99-7881G APPLICATIONS Table of Contents Honda Civic 2012 99-7881G Dash Disassembly – Honda Civic 2012 ..........2 Kit Assembly ISO DIN radio provision with pocket – ....3 KIT FEATURES • ISO DIN radio provision with pocket •...
-
Página 2: Dash Disassembly
99-7881G Dash Disassembly 1. Remove instrument cluster surround panel. (Figure A) 2. Remove (2) Phillips screws securing accessory power socket panel. (Figure B) 3. Remove (2) 8mm/Phillips screws from under radio chassis. (Figure C) 4. Remove radio from dash and disconnect harnesses. -
Página 3: Kit Assembly
(Figure C) (Figure A) (Figure B) 4. Locate the factory wiring harness and antenna plug in the dash. Metra recommends using the proper mating adapters from Metra and/or AXXESS. 5. Use (2) supplied #8 x 1/2” Phillips screws to secure the radio assembly in the sub dash. - Página 4 INSTALLATION INSTRUCTIONS FOR PART 99-7881G NOWLEDGE IS OWER Enhance your installation and fabrication skills by enrolling in the most recognized and respected mobile electronics school in our industry. Log onto www.installerinstitute.com or call 800-354-6782 for more information and take steps toward a better tomorrow.
- Página 5 U.S. PATENT # D716,790 INSTRUCCIONES DE INSTALACIÓN PARA LA PIEZA 99-7881G APLICACIONES Indice Honda Civic 2012 99-7881G Desmontaje del tablero – Honda Civic 2012 ..........2 Ensamble del kit Provisión de radio ISO DIN con bolsillo – ... 3 CARACTERÍSTICAS DEL KIT •...
-
Página 6: Desmontaje Del Tablero
99-7881G Desmontaje del tablero 1. Retire el panel que rodea el conjunto de instrumentos. (Figura A) 2. Retire los (2) tornillos Phillips que sujetan el panel del bolsillo de energía para accesorios. (Figura B) 3. Retire los (2) tornillos Phillips/de 8mm del chasís debajo del radio. -
Página 7: Ensamble Del Kit
(Figura B) 4. Ubique el arnés de cableado de fábrica y el conector de la antena en el tablero. Metra recomienda el uso de adaptadores adecuados de acoplamiento de Metra y/o de AXXESS. 5. Use los (2) tornillos Phillips #8 de 1/2”suministrados para sujetar el... - Página 8 INSTRUCCIONES DE INSTALACIÓN PARA LA PIEZA 99-7881G EL CONOCIMIENTO ES PODER Mejore sus habilidades de instalación y NOWLEDGE IS OWER Enhance your installation and fabrication skills by fabricación inscribiéndose en la escuela de enrolling in the most recognized and respected dispositivos electrónicos móviles más reconocida...