Online Help - AVM FRITZ!DECT 210 Instalación Y Operación

Reset Consumption Data
FRITZ!DECT 210 can save your consump-
tion data. If you would like to start a new
consumption log, you can delete the
consumption data.
1. Open the user interface with the
"Smart Home" (see page 8).
2. Click on (Edit) and then on
"Energy Display".
3. Click "Total consumption (kWh)" and
reset the consumption data.
4. Click "OK" to save your settings.
12

Online Help

FRITZ!DECT 210 is displayed and de-
scribed in your FRITZ!Box user interface.
Detailed information on the settings of
FRITZ!DECT 210 is presented in the online
help.
Start the online help for a page of the user
interface by clicking on the question mark
icon.
Deregistering FRITZ!DECT 210
Deregister FRITZ!DECT 210 from your FRITZ!Box if you would like to take FRITZ!DECT 210
out of operation permanently, or if ou would like to register FRITZ!DECT 210 with another
FRITZ!Box.
Press and hold the "DECT" button down for at least six seconds.
After a brief delay the "DECT" LED begins fl ashing and FRITZ!DECT 210 is deregistered
from the FRITZ!Box.
FRITZ!DECT 210 can be re-registered with another FRITZ!Box.
Help in Case of Errors
No Connection with the Base Station
Error Remedy
1. Insert FRITZ!DECT 210 into an outlet near your
FRITZ!Box.
2. If the "DECT" LED lights up now, the fi rst outlet is
located outside the range of the FRITZ!Box, or the
The "DECT" LED fl ashes
wireless connection was faulty.
briefl y at regular intervals.
Typical sources of interference include (multiple)
FRITZ!DECT 210 does not
closed doors and zones with high humidity (damp
have a wireless connection
walls, clothes drying racks).
to the FRITZ!Box.
3. If "DECT" continues fl ashing, FRITZ!DECT 210 is not
registered with the FRITZ!Box. Register
FRITZ!DECT 210 again.
13