Assembling And Operating The Juicer - Impecca courant CJC-4021 Guia Del Usuario

Assembling and Operating the Juicer

Assembling the Juicer
WARNING: Ensure the appliance is unplugged
Some parts may have sharp edges.
Handle them with care.
1. Fit the drive stem (
base unit.
2. Fit the juicer container (
3. Fold the juice spout up (
4. Fit the juicer dome (
5. Fit the pulp sieve (
6. Fit the lid insert (
7. Place the hinge of the lid (
10
base unit ( ).
8. Close the hinge latch (
the base unit by swinging it
upward so that it snaps on to the
lid (see image to the right).
9. With the lid now on the hinge,
close the lid and ensure
2
the lid lock ( ) locks into place.
10. Connect the appliance to power. There is a power cord
storage compartment in the base of the unit. Remove
the cord from the compartment as needed.
The juicer is now ready for use!
Extracting juice from citrus with your juicer
1. With the juicer now assembled, ensure the spout (
folded down and place a suitably sized container under-
neath the spout.
2. Open the lid by pulling gently on the lid lock (
The lid should swing up and open on its hinge.
3. Cut a piece of citrus fruit in half. Place one of the halves
onto the dome with the flat/open side of the fruit facing
downward.
11
) onto the driveshaft (
12
) onto the drive stem (
3
).
14
) onto the pulp sieve (
13
) onto the juice container (
15 17
) into the lid (
16
) onto the hinge of the
16
) on
Step 8
9
) of the
11
).
13
).
12
).
).
3
) is
2
).
8
17
16
15
14
13
12
11
10
9
8
2
1
3
4
5
6
7