General Information; Cleaning; After Cleaning - LG LSC27931 Serie Manual De Usuario

Ocultar thumbs Ver también para LSC27931 Serie:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Care and Maintenance
Vacation Time
Power Failure
If You Move
Anti-
Condensation
Pipe
Exterior
Interior

After Cleaning

WARNING

General Information

During average length vacations, you will probably nd it best to leave the refrigerator
in operation. Place freezable items in freezer for longer life.
When you plan to store the refrigerator, remove all food, disconnect the power cord,
clean the interior thoroughly, and Block the doors open to prevent mold and mildew.
Be certain the stored refrigerator does not present a child entrapment danger.
Most power failures that are corrected in an hour or two will not a ect your
refrigerator temperatures.
However, you should minimize the number of door openings while the power is o .
Remove or securely fasten down all loose items inside the refrigerator.
To avoid damaging the height adjusting screws, turn them all the way into the base.
The outside wall of the refrigerator cabinet may sometimes get warm, especially just
after installation.
Don't be alarmed. This is due to the anti-condensation pipe, which pumps hot
refrigerant to prevent sweating on the outer cabinet wall.

Cleaning

It is important that your refrigerator be kept clean to prevent undesirable odors. Spilled
food should be wiped up immediately, since it may acidify and stain plastic surfaces if
allowed to settle.
Use a lukewarm solution of mild soap or detergent to clean the durable nish of your
refrigerator. Wipe with a clean damp cloth and then dry.
Regular cleaning is recommended. Wash all compartments with a baking soda
solution or a mild detergent and warm water. Rinse and dry. If you use other substances
for cleaning, your refrigerator could be damaged.
Please verify that the power cord is not damaged, power plug is not overheated, or
power plug is well inserted into the power socket.
Always remove power cord from the wall outlet prior to cleaning in the vicinity of
electrical parts (lamps, switches, controls, etc.).
Wipe up excess moisture with a sponge or cloth to prevent water or liquid from
getting into any electrical part and causing an electric shock.
Never use metallic scouring pads, brushes, coarse abrasive cleaners, strong alkaline
solutions, ammable or toxic cleaning liquids on any surface.
Do not touch frozen surfaces with wet or damp hands, because damp object will stick
or adhere to extremely cold surfaces.
22
6

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido