Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Using Video Call Camera
Front
Microphones
Activity Indicator
Lens
Stand
Product Handling
Do not let the camera get wet. Liquid getting into the
y
y
camera could cause a short circuit.
Wipe the camera gently with a dry cloth to remove any
y
y
dust or dirt. If the product is very dirty, spray a mild
detergent on the cloth first.
Do not clean with thinner, alcohol, benzene or any other
y
y
volatile agent. These may damage the product's surface or
affect its operation.
Do not disassemble, repair or alter the product. Incorrect
y
y
disassembly may cause a fire, electric shock, or injury.
y
y
Do not shake the camera.
Do not pull on the cable.
y
y
Rear
Stand-Bottom
Installation instructions
Make sure you have enough space for connections when
y
y
installing the product.
Do not install in a dusty, dirty or moist area.
y
y
Do not install in direct sunlight or near a heat source.
y
y
Magnetic objects, such as speakers, may interfere with
y
y
the camera's operation.
Install the product in a place with moderate temperature
y
y
and humidity. The recommended temperature range
is 0 °C (32 °F) to 40 °C (104 °F).
Strong electromagnetic waves from other devices could
y
y
interfere with the camera's operation.
Remove all the protective plastic bags (Vinyl) before use.
y
y
The product and company names contained in this manual may
be registered trademarks or copyrights, and are only used for
identification or explanatory purposes. All trademarks reserved.
No emergency calls with Skype
Skype is not a telephony replacement service,
and cannot be used for emergency service dialing.
ASSEMBLING AND PREPARING
USB Cable
Stand-Arm
Stand-Cable holder
15
Publicidad
Capítulos
Tabla de contenido
Solución de problemas
