Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Registering Magic Remote Control
The Magic Remote Control operates by pairing with your TV.
Please register the remote as follows.
How to register the Magic Remote Control
To register automatically, turn the TV on and press
the
Wheel (OK). When registration is completed,
the completion message appears on the screen.
If registration fails, turn the TV off and back on, then
(Wheel)
press the
Wheel (OK) to complete registration.
How to Re-register the Magic Remote Control
1 Press and hold the BACK
BACK
SMART
buttons together for 5 seconds to
reset, then register it by following "How to
register the Magic remote control" above.
SMART
2 To re-register the Magic remote control, press and
hold the BACK
the TV.
How to use Magic Remote Control
1 You can move the pointer by aiming the Pointer
Receiver of the remote control at your TV then
move it left, right, up or down.
- If the pointer does not work properly leave the
remote control for 10 seconds then use it again.
2 If the pointer disappears, move the remote control
slightly to left or right. Then, it will automatically
appear on the screen.
- If the pointer has not been used for a certain
period of time, it will disappear.
and
button for 5 seconds toward
MAGIC REMOTE CONTROL FUNCTIONS
If you press
Wheel (OK) on the Magic remote control,
the screen appears.
1
Shows information about the current program and
screen.
2
You can select My Apps Menu.
Precautions to take when using the
Magic Remote Control
Use the Magic remote control within the maximum
y
y
communication distance (10 m, 32.8 ft). Using the remote
control beyond this distance, or with an object obstructing
it, may cause a communication failure.
A communication failure may occur due to nearby devices.
y
y
Electrical devices such as a microwave oven or wireless
LAN product may cause interference, as these use the
same bandwidth (2.4 GHz) as the Magic remote control.
The Magic remote control may be damaged or may
y
y
malfunction if it is dropped or receives a heavy impact.
Take care not to bump into nearby furniture or other people
y
y
when using the Magic remote control.
y
y
Manufacturer and installer cannot provide service related
to human safety as the applicable wireless device has
possibility of electric wave interference.
It is recommended that an Access Point (AP) be located
y
y
more than 1 m (3.28 ft) away from the TV. If the AP is
installed closer than 1 m (3.28 ft), the Magic remote
control may not perform as expected due to frequency
interference.
29
Publicidad
Capítulos
Tabla de contenido
Solución de problemas
