How to check if remote view function works?
1. Exit the "BVCAM" APP.
2. Go back to the WIFI or WLAN setting page on your smartphone or tablet PC, exit
your phone or mobile device from the current WIFI hotspot, enroll your mobile
device to another WIFI hotspot, or you can turn off the WLAN function and use your
mobile network.
3. Launch the "BVCAM" APP again.If it shows the camera is "Online" on the"Live
video"page, that means theremote view setup is successful and the camera has
entered into WAN mode. You can view the camera's live video through Internet. The
red indicator light will be illuminated while the blue one will keep flashing.
If it shows the camera is "Offline" on the"Live video"page, this means theremote view