Wiseup WIFI05 Manual Del Usuario página 7

setup failed and you need to reset the camera (See VIII) and set up all over again.
V. Motion Detection Setup
>> Make sure that the camera is added to the APP before you start.
>> Make sure that a Micro SD card (4GB-32GB) has been formatted already and is
securely fitted into the SD card slot on your camera. For this camera, we
recommend you to use a SDHC Class 10 Micro SD card.
5.1. Motion Detection Photograph Setup
5.1.1. Launch the "BVCAM" APP.
5.1.2. Enable the motion detection function as below:
Step1: Tap the setting icon on the "Live video" page then choose "Device
Settings"or "Advance Config".
Step 2: Go to "Alarm Config" page then choose a desired alarm sensitivity level.
Step 3: Tap "OK" to complete the setting.