temperature will be restored. At the first start-
up, the wine cellar will be set on "Red Wine"
with a preset temperature of 16°C.
- Programme: to select the cellar programme,
press the programme button until reaching the
required programme. Sequentially, the
programmes that can be selected are: "Red
Wine", "White Wine", "Champagne", "Mix".
The LED corresponding to the programme will
switch on at each programme change and the
display will show the preset temperature (if
the programme was selected for the first time)
or the temperature set by the user (see table
1). The programme will start 5 seconds after
the release of the button.
- Temperature °C: to set the temperature just
press the button "TEMP C°" after selecting the
programme. The temperature will change
according to the sequence (e.g. 7-8-9-10-11-
12-13-14-15-16-17-18-7-8-...). The
temperature change will start 5 seconds after
the release of the button.
- Light button: pressing the light button, you
switch the light on or off.
-E1: Temperature probe problem
The table for temperature range and preset
temperatures for each programme is shown
here below:
PROGRAMME
PRESET
TEMPERATURES
(Celsius)
RED WINE
16°C
WHITE WINE
12°C
CHAMPAGNE
8°C
MIX
14°C
Shelves
Shelf is chrome plated or wooden wine rack.
To accommodate different size bottles, they
can be moved up or down by sliding them out
the tracks first. Shelves are designed to
accommodate maximum amount of bottles.
Wine Rack
There is an additional wine rack at bottom
section of the unit where you can store up to 6
wine bottles. This rack is removable for
cleaning purpose.
There is a 4 to 6 C variance between the top
and bottom shelves of the wine chiller.
Therefore, If you have set the wine chiller for
red wine only and you want to place a mix of
white and red wines, you should place the
white wine bottles on the bottom shelves and
the red wines on the top shelves.
CARE AND MAINTENANCE
Cleaning Your Wine Cooler
• Unplug the wine cooler and remove the
• Wash the inside with a warm water and
• Wash the shelves and trays with a mild
• The outside of the wine cooler should be
• It may also be necessary to periodically wipe
Maintenance of Your Wine Cooler
Power Failure
Most power failures are corrected within a few
hours and should not affect the temperature
TEMPERATURE
of your wine cooler if you minimize the
RANGE
number of times the door is opened. If the
power is going to be off for a longer period of
7-18°C
time, you need to take the proper steps to
7-18°C
protect your contents.
7-18°C
Vacation Time
7-18°C
During long absences, remove all the bottles;
unplug your wine cooler, clean your wine
cooler, and leave the door open slightly to
avoid possible formation of condensation,
mold, or odors.
Moving Your Wine Cooler
• Remove all the bottles.
• Securely tape down all loose items inside
• Turn the levelling screws up to the base to
• Tape the doors shut.
• Be sure the wine cooler stays in the upright
TROUBLESHOOTING
bottles.
baking soda solution. The solution should be
about 2 tablespoons of baking soda to a liter
of water.
detergent solution.
cleaned with mild detergent and warm
water.
the bottom part of the storage area, as the
wine cooler is designed to retain humidity,
and condensation may collect there.
your wine cooler.
avoid damage.
position during transportation.
27