LINKIN Ride Pal Manual Del Usuario página 2

KEY
DISTRIBUTION
PHONE
DOWN
BLUE LIGHT
RED LIGHT
UP
POWER
LINKIN RIDE PAL
For motorcyclists. Easy to use solutions for riders
who need communication during the journey.
TECH SPECS
1. English voice prompt support.
2. Pair two cellphones at the same time.
3. Power on voice prompt.
4. DSP Eliminate enviromental noise.
5. VOX function, michrophone shuts off when you
don"t talk.
6. Internal three-way switch intercom support.
7. Intercom distance 1000M.
8. Lightning and micro USB compatible.
ASSEMBLY
1. Take off the back liner and remove one side of
the chin cover, then assembly the chin cover with
Bluetooh key.
2. Assembly the ear microphones in two sides.
3. Assembly the battery of the Bluetooth at the
back of the EPS, and then take care of the lines.
4. Assembly the back liner.
POWER ON
Long press about 2s, blue light on, voice
prompt "Power on".
POWER OFF
Press and approximately 2s at the same time,
the red light on, the voice prompt "Power off".
PAIR WITH OTHER LINKIN AND INTERCOM
In power on state, long press two LINKIN
7s at the same time, red and blue light flash alter-
nating. and then press any one
be prompted to "Searching". After the success of
the match, it will be prompted "Pair successful".
PAIR WITH THE THIRD LINKIN
In power on state,long press two LINKIN
EN
ES
FR
IT
DE
about
LINKIN, it will
3
about