LINKIN Ride Pal Manual Del Usuario página 3

5s at the same time, red and blue light flash alter-
nating. and then press any one
be prompted to "Searching". After the success of
the match, it will be prompted "Pair successful".
CONNECTION/DISCONNECTION INTERCOM
OF THE SECOND LINKIN
Short press .
CONNECTION THE THIRD LINKIN
Double press .
DISCONNECTION THE THIRD LINKIN
Short press .
When Two LINKIN in intercom, when there is the
third LINKIN call in, there is bell prompt from third
party, within the 8s, double-click
third party LINKIN intercom. If no operation within
8s, ignore the third party call.
CONNECT MOBILE
When power on, it will automatically connect
mobile phone, if not, short press
connect mobile phone.
VOICE DIAL
Power on and connected phone, short press
AT THE END OF THE CODE REDIAL
At boot stage, connected the phone, and then
double-click . Prompt "Redialing"
TO ANSWER PHONE CALL
When calling, it will automatically receive the
phone call after 8s, in the case of a call, short
press to answer.
REFUSE TO ANSWER PHONE CALL
When there is Calls, within 8s, double-click the
refused.
LINKIN, it will
, switch to the
, to make it
.
END PHONE CALL
During the call, short press
MUSIC PLAY/PAUSE
Long press about 2s, hear a chime.
MUSIC AND SONG ADJUST
Music playing, double press
VOLUME
Short press / .
ENTER THE FACTORY SELF-INSPECTION
MODE
Press and key at the same time, red and blue
lights short flashing instructions into self-inspec-
tion mode.
KEY TEST
Machine in self-test mode, each button operation,
short blue lights flashing.
AUDIO TEST
Machine in self-inspection mode, long press
about 2s, red light short flash indicate into the
audio self test. Meanwhile, through the LINKIN
a microphone to talk, can be heard each other
in the two headphones. Long press 2s exit the
audio test.
WIRELESS TRANSMITTING TEST
Machine in self-test mode, long press
the wireless transmitting test mode. End of the
test, insert charging reset. It will be prompted
"Pair successful".
to hang up.
EN
/ .
ES
FR
IT
DE
2s, into
5