Disassembling Your Breville Juice Fountain - Breville Juice Fountain Instrucciones De Uso Y Libro De Recetas

OPERATING YOUR BREVILLE JUICE FOUNTAIN cont'd
Hint:
To minimize washing up we suggest you place
a plastic freezer bag (or plastic grocery bag)
into the Pulp Container to collect the pulp.
When the juicing is completed simply place
the bag containing the pulp into a bin. The bag
may also prevent pulp from spitting out of the
pulp container. (Refer to page 19 for ideas on
'Using the pulp'.)
Do not allow the Pulp
Container to overfill as this
may prevent correct operation
or damage the unit.
Clean up tip:
For easy cleaning immediately after each use
rinse Juice Fountain removable parts under
running water (to remove wet sticky pulp).
Then allow to air dry.
12

DISASSEMBLING YOUR BREVILLE JUICE FOUNTAIN

Step 1.
Turn Juice Fountain Professional 'OFF' at
power outlet and unplug.
Step 2.
Remove the Pulp Container by tilting the
Container slightly
HINT:
TO MINIMIZE
WASHING UP
PLACE A
PLASTIC
Step 3.
FREEZER BAG
Place both hands on either side of the
INTO THE
PULP
Locking Arm, lift arm upwards slightly and
CONTAINER
TO COLLECT
pull back.
THE PULP.
Step 4.
Move the Locking Arm down.
Step 5.
Lift off the Cover.
THE STAINLESS STEEL FILTER BASKET CONTAIN, SMALL SHARP
BLADES TO CUT AND PROCESS FRUITS AND VEGETABLES.
DO NOT TOUCH BLADES WHEN HANDLING THE FILTER BASKET.
Fig 2.
Fig 3.
Fig 4.
Fig 5.
13