Tusa DUO-AIR II Manual Del Usuario página 5

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

Performance:
Weight (without quick-disconnect and hose)
Average Flow Rates:
Demand Regulator
Inflator
Deflator
Demand Valve Design
Assisted Hose Length
MAINTENANCE
After use, especially in chlorinated water, the TUSA DUO-
AIR II should be set up on a scuba tank, pressurized,
and thoroughly rinsed with fresh water.
Let water run into the mouthpiece and flow out the
exhaust port.
Prior to every dive carefully check the TUSA DUO-AIR II
for air leakage and proper functioning.
CAUTION
DO NOT USE silicone grease on the diaphragm and/or the
exhaust valve, it may cause damage to the silicone rubber.
Max Intermediate Pressure is 1.103 kPa (160 psig).
Using the TUSA DUO-AIR II with first stages exceeding
this intermediate pressure may cause air leakage from the
mouthpiece and inflation of the buoyancy vest.
190 grams (6.7 oz.)
906 liters/minute
215 liters/minute
368 liters/minute
Downstream, Venturi
70 cm. standard
GB
4

Publicidad

Tabla de contenido
loading

Productos relacionados para Tusa DUO-AIR II

Este manual también es adecuado para:

Ss0002

Tabla de contenido