Presetting Stations - Sangean PR-D18 Manual Del Usuario

Presetting stations

You may store your preferred AM/FM radio stations to the preset
stations ( to 5). The procedure for setting preset Stations is
described below.
Note that the radios for AM and FM are saved together in the preset
stations so there are 0 of them. Your preset stations will be
preserved for 30 minutes when there is no power supply from either
the battery or the AC adapter.
. Press the Power button to switch on your radio.
2. Tune to the required station as previously described.
3. Press and hold the required Preset button (-5) until you hear a
beep sound and the display shows'M' for example next to the
frequency. The station will be stored using the preset number.
Repeat this procedure for the remaining presets as you wish.
4. Preset stations which have already been stored may be overwritten
by following the above procedure if required.
0