Important Safety Instructions - Napa 85-8100 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

NAPA 85-8100 Digital Wheel Charger
WARNING: Handling the cord on this product or cords associated with
accessories sold with this product, may expose you to lead, a chemical
known to the State of California to cause cancer and birth defects or
other reproductive harm. Wash hands after handling.
CaUTION: Charger must be fully assembled before operating. See section 3 for in-
structions.
1.

IMPORTANT SAFETY INSTRUCTIONS

READ AND SAVE THESE INSTRUCTIONS. THIS MANUAL CONTAINS IMPORTANT AND
OPERATING INSTRUCTIONS.
WARNING: RISK OF EXPLOSIVE GAS.
1.1 WORKING IN THE VICINITY OF A LEAD-ACID BATTERY IS DANGEROUS. Batteries generate
explosive gases during normal battery operation, and when discharged or charged. For this rea-
son, IT IS OF UTMOST IMPORTANCE THAT BEFORE USING YOUR CHARGER, YOU READ
THIS MANUAL AND FOLLOW THE SAFETY AND OPERATING INSTRUCTIONS EXACTLY.
1.2 To reduce risk of battery explosion, follow these safety instructions and those published by the
battery manufacturer and the manufacturer of any equipment you intend to use in the vicinity of
a battery. Review cautionary marking on these products and on engine, and on vehicle or equip-
ment containing the battery.
1.3 CAUTION: To reduce risk of injury, CHARGE ONLY RECHARGEABLE LEAD-ACID TYPE
BATTERIES which may include maintenance-free, low-maintenance or deep-cycle batter-
ies. OTHER TYPES OF BATTERIES MAY BURST causing personal injury and damage.
If you are uncertain as to the type of battery you are attempting to charge, or the correct proce-
dure for checking the battery's state-of-charge, contact the seller or battery manufacturer.
1.4 Use of an attachment not recommended or sold by the battery charger manufacturer may result in
a risk of fire, electric shock, or injury to persons.
1.5 To reduce risk of damage to electric plug and cord, pull by plug rather than cord when disconnect-
ing the charger.
1.6 Position AC and DC leads to avoid tripping over them and to prevent damage by hood, doors, or
moving engine parts; protect from heat, oil, and sharp edges.
1.7 Do not operate charger if it has received a sharp blow, been dropped or otherwise damaged in
any way; take it to a qualified service center.
1.8
Do not disassemble NAPA Digital Wheel Charger; take it to a qualified service center when repair
is required. Incorrect reassembly may result in a risk of electric shock or fire.
1.9 To reduce risk of electric shock, unplug charger from the AC outlet before attempting any mainte-
nance or cleaning. Turning off the controls will not reduce this risk.
Instruction Manual
▪  ▪

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido