Before Use; Charging The Product; Use - Powerfix Profi HG04346A Instrucciones De Utilización Y De Seguridad

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

Before use

Charging the product

Note: Remove all packaging materials from the product.
Note: You can recharge the product using a normal household socket
or using your car's 12 V connection.
Note: The fuse of the car charger adapter
The technical data of the fuse must comply with information given in
the section "Technical data". The fuse may only be replaced by a
qualified electrician.
CAUTION! Do not connect the product to your car's 12 V connection
if the car battery is already old and worn. Doing so could mean that
the car engine will no longer start.
Note: In order to use the product without a USB cable
to recharge the rechargeable battery before use. The charging process
takes about 4 to 5 hours. The rechargeable battery is firmly integrated
into the base of the product.
Note: Charge the product for approx. 12 hours prior to first use.
Connect the USB cable
adapter
or the car charger adapter
11
Connect the micro-USB connector on the USB cable
micro-USB input socket
Plug the power adapter
adapter
12
Note: During charging, the charging indicator
charging is complete, the charging indicator
the charging indicator
the socket or the car charger adapter
Disconnect the mains adapter and car charger adapter from the prod-
uct to prevent the rechargeable battery from discharging.

Use

RISK OF ACCIDENT! Preferably do not use the product whilst
driving the vehicle. When using the product in a vehicle, be sure this does
not endanger the driver or the passengers. Always store and secure the
product so that even full braking does not pose a risk of injury from the
product or product damage.
The product may be secured with the hook
a flat, ferromagnetic surface using the magnetic base
magnet
at the back. Use the joint
10
180 ° on the magnetic base
CAUTION! Please note the position of your hands whilst turning
the magnetic base
with the USB connector of the power
13
on the product.
7
into a socket, or plug the car charger
11
into the 12 V socket in your vehicle.
is green, pull the power adapter
6
to prevent pinching your fingers (see Fig. C).
3
can be exchanged.
12
.
12
6
lights up green. When
6
from the 12 V connection.
12
5
to tilt the product up to
9
.
3
, you need
13
to the
13
lights up red. When
out of
11
or by securing it to
or the
3
GB/MT
37

Publicidad

Tabla de contenido
loading

Tabla de contenido