Levelling The Appliance - LG WT25 TS6H Serie Manual Del Propietário

Levelling the Appliance

Checking Levelling
When pushing down the edges of the appliance
top plate diagonally, the appliance should not
move up and down at all (Check both directions). If
the appliance rocks when pushing the machine top
plate diagonally, adjust the feet again.
Adjusting Levelling Feet
If the floor is uneven, turn the adjustable feet as
required (Do not insert pieces of wood etc. under
the feet). Make sure that all four feet are stable
and resting on the floor and then check that the
appliance is perfectly level.
NOTE
• Timber or suspended type flooring may
contribute to excessive vibration and unbalance.
• If the washing machine is installed on a raised
platform, it must be securely fastened in order to
eliminate the risk of falling off.
• If the washing machine is installed on a uneven,
weak or tilted floor causing excessive vibration,
spin failure or UE error can occur. It must be
placed on a firm and level floor to prevent spin
failure.
16
EN