Troubleshooting; Before Calling For Service; Error Messages - LG WT25 TS6H Serie Manual Del Propietário

TROUBLESHOOTING

Before Calling for Service

The appliance is equipped with an automatic error-monitoring system to detect and diagnose problems at
an early stage. If the appliance does not function properly or does not function at all, check the following
before you call for service:

Error Messages

Symptoms
The door is not closed
dE
properly.
Door lock switch error.
dL
Special Drain Feature.
dr
Water supply taps are not
fully open.
Water line hoses are kinked,
pinched, or crushed.
Water inlet filters are
IE
clogged.
Water supply pressure to tap
or house is too low.
Water supply connected with
leak limiting hoses.
Foreign objects, such as
coins, pins, clips, etc., caught
LE1
between the wash plate and
the inner basket.
Drain hose is kinked,
pinched, or clogged.
OE
Drain discharge is more
than 1.2 m above bottom of
washing machine.
Reason
• Close the door completely. If the error code is
• Check nothing is caught under the door,
• Close the door completely. If the error code is
• If the washing machine is paused during a cycle
• Fully open tap.
• Straighten the hose(s).
• Clean the inlet filters.
• Contact a plumber to have the water lines
• Do not use leak limiting hoses.
• Turn off the washing machine and then
• Straighten the hose(s).
• Adjust or repair drain. Maximum drain height is
Solution
not released, call for service.
including shipping materials or clothing.
not released, call for service.
for a few minutes, the cycle will be cancelled
and any water remaining in the drum will be
drained.
repaired.
press the Power button. Press the
Centrifugado (Spin) button without selecting
a cycle to drain and spin the load. When the
spin is complete, remove the clothes and then
find and remove any objects caught in the wash
plate.
1.2 m.
EN
35