Publicidad
Idiomas disponibles
Idiomas disponibles
Enlaces rápidos
THIS INSTRUCTION BOOKLET CONTAINS
IMPORTANT SAFETY INFORMATION. PLEASE
READ AND KEEP FOR FUTURE REFERENCE.
Please Recycle
Recicle Por Favor
0
29986 59853
0
WWW.AMERIWOOD.COM/PARTS
For prompt, reliable service please have your assembly manual ready.
Recommended # of people needed for assembly: 1
(however it is always better to have an extra hand.)
Estimated assembly time is 1 hour.
Se localizan las traducciones españolas en el centro de este
manual.
5985333W
DO NOT RETURN PRODUCT TO THE STORE
STOP
Individual stores do not stock parts.
Date of Purchase
___ / ___ / ___
If a part is missing or damaged, visit our website or call our toll-free
customer service line. We will gladly ship your replacement parts
FREE of charge.
Need Parts or Assistance?
or call toll free:
1-800-489-3351
B345985333W0 0
Publicidad
Manuales relacionados para Ameriwood HOME 5985333W
Resumen de contenidos para Ameriwood HOME 5985333W
- Página 1 5985333W 29986 59853 DO NOT RETURN PRODUCT TO THE STORE STOP Individual stores do not stock parts. Date of Purchase ___ / ___ / ___ If a part is missing or damaged, visit our website or call our toll-free customer service line. We will gladly ship your replacement parts FREE of charge.
- Página 3 Parts Parts shown are the base cabinet of your model. Please note, most parts are labeled with a sticker or have a letter stamped on a raw edge. Parts List ITEM PART NUMBER DESCRIPTION 35985333010 LEFT PANEL 35985333020 RIGHT PANEL This piece is of paperboard construction.
- Página 4 Hardware HARDWARE COMPARTMENT LAYOUT nail angle bracket cam bolt wood dowel 1-1/4" screw #A21110 #A53600 #A21660 #A22510 #A11600 Qty: 4 Qty: 20 Qty: 8 Qty: 8 Qty: 8 cam lock 7/16" flat screw euro screw 7/16" pan screw tack glide #A22570 #A11080 #A11070...
- Página 5 This illustration shows how the cam fastening system works. Esta ilustración muestra el sistema de fijación de leva y como funciona. Caution: If using a power drill or power screwdriver for Tighten to fully seat. Do not over screwing, please be aware to slow down and stop when tighten.
- Página 6 Screw four cam bolts (1) into the top (C). Fasten the apron (E) to the top (C) with angle brackets (7) and screws (4). Tap four wood dowels (3) into the brace (F) as shown. B345985333W0 0 6 /19...
- Página 7 Insert four cam locks (2) into the bottom (D). Fasten the kick (E) to the bottom (D) with angle brackets (7) and screws (4). Tap two wood dowels (3) into the bottom (D) as shown. center the holes in the Kick (E) with the Angle Brackets (7) centrar los orificios del Retroceso (E) con los Soportes (7) proper orientation of cam lock posición correcta de la cerradura de leva...
- Página 8 Insert two cam locks (2) and tap a wood dowel (3) into the left panel (A). Screw two cam bolts (1) into the left panel (A). Fasten two metal slides (11a) to the left panel (A) with euro screws (9). proper orientation of cam lock posición correcta de la cerradura de leva finished edge...
- Página 9 Insert two cam locks (2) and tap a wood dowel (3) into the right panel (B). Screw two cam bolts (1) into the right panel (B). Fasten two metal slides (11b) to the right panel (B) with euro screws (9). proper orientation of cam lock posición correcta de la cerradura de leva finished edge...
- Página 10 Attach the bottom (D) and the brace (F) to the left and right panel (A&B) and tighten the cam locks. note the orientation of the holes in the Brace (F) notar la orientación de los orificios del Soporte (F) LOCK APRETAR all finished edges and surfaces are facing upwards todos los bordes y superficies acabadas estén mirando hacia arriba...
- Página 11 5985333W No regrese el producto a esta tienda, tiendas individuales no almacenan partes. Si le falta una parte o esta danada, llame al numbero gratis a la lineas de servicio al cliente. Nosotros con gusto le mandaremos la parte sin ningun costo adicional.
-
Página 12: Lista De Partes
LISTA DE PARTES ITEM DESCRIPCION CANTIDAD ITEM DESCRIPCION CANTIDAD panel izquierdo perno de la leva panel derecho cerradura de la leva cima clavija de madera tornillo 7/16” fondo soporte tornillo 1-1/4” carril tornillo 7/16” frente de cajon anaquel del angulo lado izquierdo de cajon clavo lado derecho de cajon... - Página 13 PASO 3 Insertar dos Cerraduras de la Leva (2) y toque una Clavija de Madera (3) dentro el Panel Izquierdo (A) Atornille dos Pernos de la Leva (1) dentro el Panel Izquierdo (A) Fijar dos Correderas (11a) al Panel Izquierdo (A) con el Tornillos (9) PASO 4 Insertar dos Cerraduras de la Leva (2) y toque una Clavija de Madera (3) dentro el Panel Derecho (B) Atornille dos Pernos de la Leva (1) dentro el Panel Derecho (B)
- Página 14 PASO 9 Fijar los Lados de Cajon (H&I) al Frente de Cajon (G) con los Tornillos (4) PASO 10 Deslice el Fondo de Cajón (K) en las ranuras de los Lados de Cajón (H&I) y Frente de Cajón (G) Fijar el Trasero de Cajón (J) a los Lados de Cajón (H&I) con los Tornillos (5) PASO 11 Fijar los Correderas (11c&11d) a los Lados de Cajon (H&I) con los Tornillos (6) PASO 12...
- Página 15 Attach the top (C) to the left and right panel (A&B) and tighten the cam locks. Hammer two tack glides (10) into the bottom edge of each panel (A&B) as shown. The bottom edge of the kick (E) must be flush with the bottom edge of panels (A&B).
- Página 16 the address label needs to be on this side Fasten the back panel (L) to the unit with nails (8). la etiqueta de dirección tiene que estar de este lado Attach the back panel so that the bottom edge is even with the bottom (D) and aligned side to side.
- Página 17 Lay the drawer sides (H&I) down on a flat hard surface. Carefully line up the drawer bracket (12) with the holes in the drawer sides (H&I) as shown. Using a hammer, tap each drawer bracket stem part way into each hole. Repeat this process until the drawer bracket is fully seated on the drawer side.
- Página 18 Fasten the drawer sides (H&I) to the drawer front (G) with screws (4). marked "RIGHT" marcado "RIGHT" marked "LEFT" marcado "LEFT" B345985333W0 0 14 /19...
- Página 19 Slide the drawer bottom (K) into the grooves of the drawer sides (H&I) and the drawer front (G). Fasten the drawer back (J) to the drawer sides (H&I) with screws (5). marked "BACK" marcado "BACK" finished surface superficie acabado B345985333W0 0 15 /19...
- Página 20 Fasten the metal slides (11c & 11d) to the drawer sides (H&I) with screws (6). marked with an "L" marcado con un "L" marked with an "R" marcado con un "R" B345985333W0 0 16 /19...
- Página 21 Slide both Drawers into the Cabinet. roller cabinet member rodillo corredera de mueble drawer runner deslizador de cajon roller rodillo Notice, the drawer bracket holes are slotted. Drawer fronts can be adjusted by loosening screws, making needed adjustments and retightening screws. B345985333W0 0 17 /19...
- Página 22 Call our toll free number for any assistance you should need or visit our Weight Limits website: Limites de peso 1-800-489-3351 www.Ameriwood.com/parts Clean the product with your favorite furniture polish and a soft cloth. DO NOT USE harsh chemicals or abrasive cleaners. Move your new furniture carefully with two people.
- Página 23 Certificate of Conformity 1. This certificate applies to the Dorel Home Furnishings Inc. product identified by this instruction manual. 2. This certificate applies to compliance of this product with the CPSC Ban on Lead-Containing Paint (16 CFR 1303). 3. This product is distributed by: Dorel Home Furnishings Inc. 410 East First Street South Wright City, MO 63390 636-745-3351...