Publicidad
Idiomas disponibles
Idiomas disponibles
7
Fasten the back panel (L) to the unit with nails (8).
Attach the back panel so that the bottom edge is even with
the bottom (D) and aligned side to side.
Assure that the unit is square.
Distance from corner to corner must be
equal as shown.
8
x20
WARNING
Please make sure that the Back Panel is attached securely.
All nails must be driven into the parts straight and centered.
Failure to do so could cause instability, product collapse,
and/or serious injury.
ADVERTENCIA
Por favor asegúrese que el Panel Trasero se atan
firmemente. Todos los clavos deben manejarse en las partes
recto y centro. El fracaso para hacer para que podría causar
inestabilidad, derrumbamiento del producto, y/o la lesión
seria.
B
IMPORTANT!
THE BACK PANEL IS A STRUCTURAL PART OF THIS UNIT AND MUST BE INSTALLED PROPERLY.
12 /19
the address label needs to be on this side
la etiqueta de dirección tiene que estar de este lado
L
D
turn the unit onto its front
apagar la unidad en su frente
8
B345985333W0 0
Publicidad
