Publicidad
Idiomas disponibles
Idiomas disponibles
Enlaces rápidos
THIS INSTRUCTION BOOKLET CONTAINS
IMPORTANT SAFETY INFORMATION. PLEASE
READ AND KEEP FOR FUTURE REFERENCE.
Please Recycle
Recicle Por Favor
0
29986 59863
9
STOP
If a part is missing or damaged, visit our website or call our toll-free
customer service line. We will gladly ship your replacement parts
FREE of charge.
WWW.AMERIWOOD.COM/PARTS
For prompt, reliable service please have your assembly manual ready.
Recommended # of people needed for assembly: 1
(however it is always better to have an extra hand.)
Estimated assembly time is 2 hours.
Se localizan las traducciones españolas en el centro de este
manual.
5986333W
DO NOT RETURN PRODUCT TO THE STORE
Individual stores do not stock parts.
Date of Purchase
___ / ___ / ___
Need Parts or Assistance?
or call toll free:
1-800-489-3351
B345986333W0 0
Publicidad
Manuales relacionados para Ameriwood HOME 5986333W
Resumen de contenidos para Ameriwood HOME 5986333W
- Página 1 5986333W 29986 59863 DO NOT RETURN PRODUCT TO THE STORE STOP Individual stores do not stock parts. Date of Purchase ___ / ___ / ___ If a part is missing or damaged, visit our website or call our toll-free customer service line. We will gladly ship your replacement parts FREE of charge.
- Página 3 Parts Parts shown are the base cabinet of your model. Please note, most parts are labeled with a sticker or have a letter stamped on a raw edge. Parts List ITEM PART NUMBER DESCRIPTION 35986333010 LEFT PANEL This piece is of paperboard construction. It is not made from wood, but is 35986333020 RIGHT PANEL required for the assembly of your unit.
- Página 4 Hardware HARDWARE COMPARTMENT LAYOUT euro screw nail angle bracket cam bolt 1-1/4" screw #A11070 #A53600 #A21110 #A22510 #A11600 Qty: 24 Qty: 40 Qty: 6 Qty: 14 Qty: 24 cam lock 7/16" pan screw 7/16" flat screw wood dowel #A22570 #A12120 #A11080 #A21660 Qty: 14...
- Página 5 This illustration shows how the cam fastening system works. Esta ilustración muestra el sistema de fijación de leva y como funciona. safety bracket kit #A84050 Tighten to fully seat. Do not over Qty: 1 tighten. Proper orientation of cam. Apriétese a totalmente asiento. No La orientación apropiada de leva.
- Página 6 Screw four cam bolts (1) into the top (C). Fasten the apron (E) to the top (C) with angle brackets (7) and screws (4). Fasten the safety bracket (12a) to the top (C) with screw (12b). Tap four wood dowels (3) into the braces (G). raw surface superficie cruda finished edge...
- Página 7 Insert four cam locks (2) into the bottom (D) and two cam locks (2) into the stringer (H). Tap two wood dowels (3) into the bottom (D) and the stringer (H) as shown. Fasten the kick (F) to the bottom (D) with angle brackets (7) and screws (4). center the holes in the Kick (F) with the Angle Brackets (7) centrar los orificios del Retroceso (F) con los Soportes (7) proper orientation of cam lock...
- Página 8 Insert two cam locks (2) and tap a wood dowel (3) into the left panel (A). Screw three cam bolts (1) into the left panel (A). Fasten four metal slides (10a) to the left panel (A) with euro screws (9). proper orientation of cam lock posición correcta de la cerradura de leva marked with an "L"...
- Página 9 Insert two cam locks (2) and tap a wood dowel (3) into the right panel (B). Screw three cam bolts (1) into the right panel (B). Fasten four metal slides (10b) to the right panel (B) with euro screws (9). marked with an "R"...
- Página 10 Attach the bottom (D), the three braces (G), and stringer (H) to the left and right panel (A&B) and tighten the cam locks. note the orientation of the holes in the Brace (G) notar la orientación de los orificios del Soporte (G) LOCK APRETAR all finished edges and surfaces are facing upwards...
- Página 11 5986333W No regrese el producto a esta tienda, tiendas individuales no almacenan partes. Si le falta una parte o esta danada, llame al numbero gratis a la lineas de servicio al cliente. Nosotros con gusto le mandaremos la parte sin ningun costo adicional.
- Página 12 LISTA DE PARTES ITEM DESCRIPCION CANTIDAD ITEM DESCRIPCION CANTIDAD panel izquierdo perno de la leva panel derecho cerradura de la leva cima clavija de madera tornillo 7/16” fondo delantal tornillo 1-1/4” tornillo 7/16” panel de protección carril anaquel del angulo soporte clavo frente de cajon...
- Página 13 PASO 2 Insertar cuatro Cerraduras de la Leva (2) dentro el Fondo (D) y dos Cerraduras de la Leva (2) en el Soporte (H) Toque dos Clavijas de Madera (3) dentro el Fondo (D) y Soporte (H) como se muestra Fijar el Panel de Protección (F) al Fondo (D) con los Anaqueles del Angulo (7) y Tornillos (4) PASO 3 Insertar dos Cerraduras de la Leva (2) y toque una Clavija de Madera (3) dentro el Panel Izquierdo (A)
- Página 14 PASO 8 Opción 1: Atornille (12c) a través del anaquel de seguridad (12a) y en una área sólida de la pared. Si usted no puede atornillar en algo el sólido, use opción 2 Opción 2: Taladre un agujero de 3/16" de diámetro (5mm) en la pared. Golpea la ancla de pared (12d) en el agujero hasta que sea parejo.
- Página 15 Attach the top (C) to the left and right panel (A&B) and tighten the cam locks. The bottom edge of the kick (F) must be flush with the bottom edge of panels (A&B). If it is not flush, loosen the screws fastening the angle brackets to the kick (F), adjust as necessary, then retighten the screws.
- Página 16 Fasten the back panel (O) to the unit with nails (8). the address label needs to be on this side Attach the back panel so that the bottom edge is even with the la etiqueta de dirección tiene que estar de este lado bottom (D) and aligned side to side.
- Página 17 place the unit upright colocar la unidad en posición vertical hole agujero stud montante wallboard muro Option 1: Screw (12c) through the safety bracket (12a) and into a solid area of the wall. If you cannot screw into something solid, use option 2. Option 2: Drill a 3/16"...
- Página 18 Lay the drawer sides (J&K) down on a flat hard surface. Carefully line up the drawer bracket (11) with the holes in the drawer sides (J&K) as shown. Using a hammer, tap each drawer bracket stem part way into each hole. Repeat this process until the drawer bracket is fully seated on the drawer side. marked "LEFT"...
- Página 19 Fasten the drawer sides (J&K) to the drawer front (I) with screws (4). Screw a cam bolt (1) into each drawer front (I). marked "LEFT" marcado "LEFT" marked "RIGHT" marcado "RIGHT" raw edge borde cruda B345986333W0 0 15 /20...
- Página 20 Insert a cam lock (2) and tap a wood dowel (3) into each drawer brace (N). Attached the drawer brace (N) to the drawer front (I) and tighten the cam lock. proper orientation of cam lock posición correcta de la cerradura de leva raw edge borde cruda LOCK...
- Página 21 Slide the drawer bottom (M) into the grooves of the drawer sides (J&K) and the drawer front (I) Fasten the drawer back (L) to the drawer sides (J&K) and to the drawer brace (N) with screws (5). marked "BACK" marcado "BACK" raw surface superficie cruda raw edge...
- Página 22 Fasten metal slides (10c & 10d) to the drawer sides (J&K) with screws (6). marked with an "L" marcado con un "L" marked with an "R" marcado con un "R" B345986333W0 0 18 /20...
- Página 23 Slide all four Drawers into the Cabinet. roller cabinet member rodillo corredera de mueble drawer runner deslizador de cajon roller rodillo Notice, the drawer bracket holes are slotted. Drawer fronts can be adjusted by loosening screws, making needed adjustments and retightening screws. B345986333W0 0 19 /20...
- Página 24 Weight Limits Call our toll free number for any assistance you should need or visit our website: Limites de peso 1-800-489-3351 www.Ameriwood.com/parts Clean the product with your favorite furniture polish and a soft cloth. DO NOT USE harsh chemicals or abrasive cleaners. Move your new furniture carefully with two people.