Troy-Bilt Flurry 1400 Manual Del Operador página 5

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

16.
Use the right tool. Only use this tool for the purpose
intended.
17.
Do not overreach. Always keep proper footing and balance.
18.
Always hold both hands on the upper handle when
operating the unit. Keep a firm grip on upper handle.
19.
Do not use the unit in the hand held position. Do not pick
up the unit when it is powered and running. The unit is
designed to travel on the ground. The lower lift handle is
only provided to assist in picking up or carrying the unit
when it is not plugged in.
20.
Keep hands, face, and feet at a distance from all moving
parts. Do not touch or try to stop the auger when it is
rotating.
21.
If the auger will not rotate freely due to frozen ice, thaw
the unit thoroughly before attempting to operate it under
power.
22.
Keep the auger clear of debris.
23.
Never attempt to clear the auger with the motor running.
Turn the motor off first and unplug the extension cord.
24.
Keep clothing and body parts away from the auger.
25.
Do not operate the motor faster than the speed needed.
Do not run the motor at high speed when not clearing
snow.
26.
Always stop the motor when clearing snow is delayed or
when walking from one location to another.
27.
Disengage power to the auger when snow thrower is
transported or not in use.
28.
If the snowthrower strikes a foreign object, follow these
steps
a.
Stop snowthrower.
b.
Release the Motor Control Lever.
c.
Unplug the Power Cord.
d.
Inspect for damage.
e.
Repair any damage before restarting and operating
the snowthrower.
29.
If the unit should start to vibrate abnormally, stop the unit
and check immediately for the cause. Vibration is generally
a warning of trouble.
30.
Stop the motor and unplug the unit whenever you leave
the operating position, before unclogging the auger, and
when making any repairs, adjustments, or inspections.
31.
Never discharge snow onto public roads or near moving
traffic.
32.
Let the snow thrower run for a few minutes after clearing
snow so moving parts do not freeze.
33.
Use only original equipment manufacturer replacement
parts and accessories for this unit. These are available from
your authorized service dealer. Use of any unauthorized
parts or accessories could lead to serious injury to the user
or damage to the unit, and void your warranty.
Other Safety Warnings
1.
Be sure to secure the unit while transporting.
2.
Store the unit in a dry area, locked up or up high to prevent
unauthorized use or damage, out of the reach of children.
3.
Never douse or squirt the unit with water or any other
liquid. Keep handles dry, clean and free from debris. Clean
after each use, see Cleaning and Storage instructions.
4.
If the labels on the unit become defaced or start lifting off,
contact your authorized service dealer.
5.
Keep these instructions. Refer to them often and use them
to instruct other users. If you loan someone this unit, also
loan them these instructions.
6.
Maintain snow throwers with care. Follow instructions for
lubricating and changing accessories.
SAVE THESE INSTRUCTIONS
S
2 — i
ection
mportant
S
o
p
afe
peration
racticeS
5

Publicidad

Capítulos

Tabla de contenido

Solución de problemas

loading

Tabla de contenido