G Operating instruction
1. Use
• The milk frother is ideal for cappuccinos, latte macchiatos, milk shakes,
cocktails or other milk-based products.
• Fill up your container with the desired quantity of liquid. Note that the height
of the container should be at least twice that of the amount of milk poured in.
• The milk should be heated to a maximum of 60 °C in order to achieve optimal
frothing.
• Holding the milk frother in your hand, submerge the rotor head completely in
the liquid and slide the On/Off switch forwards to begin frothing. Slide the On/
Off switch back again to stop.
• Move the milk frother back and forth with the rotor head fully submerged for
15-20 seconds.
• When an adequate amount of foam has formed, first slide the On/Off switch
back again to stop and then remove the milk frother from the liquid.
2. Replacing the battery
• Open the battery compartment by sliding the battery compartment lock to
the side.
• Insert two new AA/Mignon batteries , ensuring that the polarity is correct.
• Fully slide the battery compartment lock back into its original position.
3. Safety instructions
• The product is intended for private, non-commercial use only.
• Protect the product from dirt, moisture and overheating, and only use it in a
dry environment.
• Keep this product, as all electrical products, out of the reach of children!
• Do not operate the product continuously, as it is not designed for this.
• Do not attempt to service or repair the product yourself. Leave any and all
service work to qualified experts.
• Do not open the device or continue to operate it if it becomes damaged.
• Do not use the product in the immediate vicinity of heaters or other heat
sources or in direct sunlight.
• Do not use the product in areas where the use of electronic devices is not
permitted.
• Do not drop the product and do not expose it to any major shocks.
• Do not modify the product in any way. Doing so voids the warranty.
• Keep the packaging material out of the reach of children due to the risk of
suffocation.
• Dispose of packaging material immediately according to locally applicable
regulations.
• Do not operate the product outside the power limits given in the
specifications.
• Use the item only in moderate climatic conditions.
2