Battery Charge Indicator - Vito Agro VIPU16BB Manual De Instrucciones

PT
EN
SAFETY INSTRUCTIONS.
The sprayer with battery is an
economic, safe and efficient device
suitable for the prevention and cure
of diseases of crops and gardens.
It can also been used for the
prevention and sanitation and
disinfection of public places.
CHARACTERISTICS
The external form is ergonomic and
the combination of the air chamber
and pump located in the liquid
container makes the whole structure
compact and safe, with no leakage.
Various spray heads can be fitted for
the use in different tasks.
The chosen materials are resistant to
acidity, alkalinity, and corrosion. The
machine is sealed hermetically.
OPERATION METHOD
After the packing box of the new
machine is opened, please check all
the parts have been delivered.
Pour the liquid compound through
the filter into the container slowly.
Close the cap tightly and put the
machine on the operator's back,
adjusting the belts if necessary.
User can choose among 3 kinds of
spray heads.
SWITCH AND REGULATOR
The switch has 3 positions:
"0" – Sprayer off;
"I" – Sprayer with continuous and
constant flow;
"II" – Sprayer with adjustable
speed.
In order to adjust the flow with the
regulator, turn it clockwise. The
switch must be in position "II".
To switch it off, turn the switch to
position "0" and turn the regulator
anti-clockwise.
SWITCH
REGULATOR
BATTERY CHARGE
INDICATOR
The digital voltmeter indicates the
batterie's' voltage.
INDICADOR DE CARGA DA BATERIA
BATTERY CHARGER
When the voltage displayed in the
voltmeter is lower than 9V you
should charge the battery. Firstly
connect the charger to the battery
socket and then connect it to the
electrical 220V current.
When connecting the charger an
LED will lighten, with the following
colour:
- Red – The battery is being
charged;
- Green – The battery is completely
charged.
CHARGING INDICATOR
HANDLE LANCE AND
NOZZLE'S CONNECTIONS
The sprayers' handle is connected
with the hose. Insert the lance in
the handle, and tighten by turning it
clockwise.
Select the desired nozzle and
tighten it in the lance's existing
terminal.
TELESCOPIC LANCE
In order to use the lance with the
desired length, loosen the plastic
central nut and pull it forward.
When the lance reaches the desired
length, tighten the nut again.
CENTRAL NUT
TERMINAL TO
CONNECT NOZZLES
7