Indel B BI 36 HOME PLUS Instrucciones Para El Uso página 17

Installation
Positioning and connection
Unpacking
1 Unpack the device immediately and make
sure it has not been damaged during
transport. Should it be damaged, do not
connect, and get in touch with the Dealer.
2 Carefully remove the protections and the
adhesives, open the door and make sure
all the components are present.
3 Take out the power supply cable.
Positioning
1 Position the device in a well ventilated area,
not damp and free (avoid cabinets with
closed walls).
2 Keep the device away from heat sources.
3 Make sure the minimum distances between
the device and the walls of the room where
it is placed are kept, in order to ensure
perfect ventilation of the device.
See figure.
Ventilation space:
at least 50 mm
BI 36 HOME PLUS-BI 36 HOME 2T PLUS_13-09-2017
189A0431
189A0433
Wiring connection
After transport, stand the device vertically, and
wait for at least 3 hours before connecting it to
the wiring system. Before putting the plug into
the power socket, make sure that:
• the socket is earthed and according to legal
regulations;
• the socket is able to hold up to the maximum
power load of the machine, indicated on
the Data Sheet table or on the feature plate
to the bottom right (see Description of the
device);
• the power supply voltage falls within the
range indicated on the Data Sheet table or
on the feature plate to the bottom right (see
Description of the device);
• the power socket is compatible with the plug
of the device. Otherwise, replace the socket
or the plug; do not use extensions or multiple
sockets.
189A0432
560
min.
Dimensions
of the
compartment
560
555
587
Furniture side area
560 min.
Dimensions
of the cellar
5
GB