Using The Wine Cellar - Indel B BI 36 HOME PLUS Instrucciones Para El Uso

Using the wine cellar

Bottle ageing compartment
The ageing compartment's main function
is that of guaranteeing that your wines are
preserved in optimal conditions.
The temperature has been set in the fac-
tory at a temperature held to be excellent in
most cases and is 15°C in the upper com-
partment.
Wine has a complex nature and it derives
from a long and slow process. In order to
best express its attributes, very specific
conditions are necessary.
All wines are preserved at the same
temperature, but, depending on their
different characteristics, wines are served
and tasted at very different temperatures.
Therefore, just as for manufacturers' wine
cellars, for your new appliance, the absolute
temperature value is not important for
preserving your wine. Rather, the constant
temperature through time is important. Wine
preservation is ideal at any temperature, as
long as that temperature does not vary.
BI 36 HOME PLUS-BI 36 HOME 2T PLUS_13-09-2017
Manual temperature control
Should you need to adjust the temperature
inside the wine cellar, follow the instructions
below:
1. When you plug in your wine cellar, the
display shows the temperature that has
been set
2. Press the button
for one second. The temperature will begin
to blink.
3. Press the or
reach the desired temperature.
4. Wait 5 seconds for the temperature to
stop blinking.
5. Wait until the wine cellar reaches its
temperature before you place the wine
bottles inside.
The inside light does not go on (or it goes
off temporarily) when the inside temperature
goes over 24° C. This allows you to reach
the pre-set temperature more quickly.
GB
(see Control panel)
buttons until you
7