Transcend 365 CPAP Manual Del Usuario página 22

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

Transcend 365 miniCPAP Auto Quick Guide
Figure 1 Line the heater cartridge up with the opening in the reservoir. Lower the device onto the
reservoir. Magnets will engage to hold the two parts together.
Once the reservoir is filled completely, set it on a secure, flat surface and line up
5.
the heater wick with the opening in the reservoir. Hold the reservoir in place and
set the CPAP onto it so that the magnets snap the pieces together securely.
Note:
Be careful while inserting the heater wick into the reservoir so that the reservoir
seal does not get folded over, as this will generate water leaks.
Reservoir should
be filled to the
'Max Fill' line.
Line up the heater
wick with the
opening in the
reservoir.
Page 22

Publicidad

Tabla de contenido
loading

Tabla de contenido